Yaroslavl, Yaroslavl, Russian Federation
National Research University Higher School of Economics
Yaroslavl State Technical University
Yaroslavl, Yaroslavl, Russian Federation
UDK 666.9.013 Предприятия. Вопросы технического планирования производства. Энергоснабжение, обслуживание производства, вспомогательные производства
The paper presents the results of calculation of a pilot production line for granulated asphalt concrete mixture with inclusion of phosphogypsum and secondary polyethylene terephthalate. The authors propose a method of mixing asphalt mixture components by pelletising. The authors selected the production units of the pilot line, gave recommendations on the minimum permissible technical and operational characteristics of the equipment. The authors have developed a brief technological regulation of production, energy and resource intensity of production was determined. In addition, it allowed them to calculate the need for human resources, means of mechanisation and determine the cost characteristics of the target material. The presented data are quite complete for drawing up the terms of reference for designing a pilot production line and determining its cost parameters. This makes it possible to comprehensively characterise the developed road material both from the point of view of the level of technical and operational indicators and from the economic point of view. The paper expands the understanding of the methods of production of asphalt concrete mixtures and the raw material base of road construction.
granulated asphalt concrete mix, pelletising, phosphogypsum, secondary polyethylene terephthalate, asphalt mixing plant
1. Korolev, E.V. (2020), “Prospects for the development of building materials science”, Arkhitektura i stroitel'stvo [Academia. Architecture and Construction], vol. 3, pp. 143-159. DOI:https://doi.org/10.22337/2077-9038-2020-3-143-159 (in Russian).
2. Mohsin, U.K. (2012), “Problems of technology transfer from CSIR laboratories to industry and policy issues in India and Korea”, Sotsiologiya nauki i tekhnologii [Sociology of science and technology], vol. 3, no. 2, pp. 51-74.
3. Morone, J. and Ivins, R. (1982), “Problems and Opportunities in Technology Transfer from the National Laboratories to Industry”, Research Management, vol. 25, no. 3, pp. 35-44. DOI:https://doi.org/10.1080/00345334.1982.11756731.
4. Shiryaeva, Yu. S. and Oranova, M.V. (2007), “Modern view of pilot production and its management mechanism at an industrial enterprise”, Vestnik NNGU [Bulletin of NNSU], vol. 6, pp. 197-200 (in Russian).
5. Golikov, I.V., Gotovtsev, V.M., Ignatiev, A.A. and Gerasimov, D.V. (2019), A method for producing an asphalt binder based on phosphogypsum, RUS, Patent RF № 2701007.
6. Gerasimov, D.V., Gotovtsev, V.M. and Ignatiev, A.A. (2021), A method for producing a granular asphalt concrete mixture based on dispersed industrial and household waste, RUS, Patent RF № 2762177.
7. Ignatiev, A.A., Gerasimov, D.V., Golikov, I.V. and Gotovtsev, V.M. (2018), “Dispersed-filled composites with a structured nanoscale”, IOP Conf. Ser.: Mater. Sci. Eng, vol. 365, p. 032064. DOI:https://doi.org/10.1088/1757-899X/365/3/032064.
8. Gerasimov, D.V., Ignatiev, A.A. and Gotovtsev, V.M. (2020), “Phosphogypsum as a component of a dispersed reinforced composite on the example of a granular asphalt concrete mixture”, Vestnik Evrazijskoj nauki [Bulletin of Eurasian Science], vol. 5, p. 35 (in Russian).
9. Gerasimov, D.V., Lebedev, A.E., Ignatyev, A.A. and Murashov, A.A. (2023), “Research of the petroleum road bitumen modification process with secondary polyethylene terephthalate”, E3S Web of Conferences, vol. 457, p. 01013. DOI:https://doi.org/10.1051/e3sconf/202345701013.
10. Gerasimov, D.V. (2023), “Prediction of the granulometric composition of a granular asphalt concrete mixture”, Stroitel'nye materialy [Construction materials], no. 9, pp. 65-71. DOI:https://doi.org/10.31659/0585-430X-2023-817-9-65-71 (in Russian).
11. Belyaev, P.S., Frolov, V.A., Makeev, P.V., Shachkov, I.V., Trapeznikov, E.V. and Belyaev, V.P. (2019), “Equipment desing automation at asphalt-concrete production modernization”, Journal of Physics: Conf. Ser. – IOP Publishing, vol. 1260, no. 3, p. 032004. DOI:https://doi.org/10.1088/1742-6596/1260/3/032004.
12. Rudenko, A.I., Pidlisna, E.A., Terekh, M. and Nishchik, A.P. (2018), “Innovative equipment for oil-refining and asphalt-concrete enterprises”, Energetika: ekonomіka, tekhnologіi, ekologіya, vol. 3, pp. 63-70. (in Russian).
13. Kovács, R., Czímerová, A., Fonód, A. and Mandula, J. (2024), “The Use of Waste Low-Density Polyethylene for the Modification of Asphalt Mixture”, Buildings, vol. 14, no. 10, p. 3109. DOI:https://doi.org/10.3390/buildings14103109.
14. Schönauer, P., Gruber, M.R. and Hofko, B. (2024), “Case study of a batch asphalt mix plant: Energy consumption and emission allocation based on primary data”, Case Studies in Construction Materials, vol. 21, p. e03669. DOI:https://doi.org/10.1016/j.cscm.2024.e03669.
15. Dos Santos, M.B., Candido, J., de Souza, Baule S., de Oliveira, Yu.M.M. and Thives, L.P. (2020), “Greenhouse gas emissions and energy consumption in asphalt plants”, Revista Eletrônica Em Gestão Educacão e Tecnologia Ambiental, vol. 24. DOI:https://doi.org/10.5902/2236117062662.
16. Bražiūnas, J. and Sivilevičius, H. (2010), “The bitumen batching system's modernization and its effective analysis at the asphalt mixing plant”, Transport, vol. 25, no. 3, pp. 325-335. DOI:https://doi.org/10.5902/2236117062662.
17. Wang, J., Hu, Zh., Fu, J. and Yang, F. (2024), “Research on Energy Consumption Monitoring and Evaluation Technology for Asphalt Mixing Plants Based on the Internet of Things”, E3S Web of Conf. – EDP Sciences, vol. 512, no. 11, p. 02007. DOI:https://doi.org/10.1051/e3sconf/202451202007.
18. Uaissova, M. and Zharlykassov, B. (2024), “Application of AI Techniques for Asphalt Concrete Mix Production Optimization”, Journal Européen des Systèmes Automatisés, vol. 57, no. 2, p. 353. DOI:https://doi.org/10.18280/jesa.570205.
19. Deef-Allah, E. and Abdelrahman, M. (2022), “Interactions between RAP and virgin asphalt binders in field, plant, and lab mixes”, World Journal of Advanced Research and Reviews, vol. 13, no. 1, pp. 231-249. DOI:https://doi.org/10.30574/wjarr.2022.13.1.0744.
20. Yu, X. and Li, Y. (2010), “Optimal percentage of reclaimed asphalt pavement in central plant hot recycling mixture”, Journal of Wuhan University of Technology-Mater. Sci. Ed, vol. 25, pp. 659-662. DOI:https://doi.org/10.1007/s11595-010-0065-4.
21. Konduktorov, A.S. (2020), “On the impact of subcontracting on the pricing of facilities whose production (construction) is financed by the state”, Vestnik ekonomicheskoj bezopasnosti [Bulletin of Economic Security], no. 4, pp. 40-43. DOI:https://doi.org/10.24411/2414-3995-2020-10227 (in Russian).
