Reducing the material consumption of stucco decorations based on information technology

Sergey Fedosov; Evgeniy Shabanov; Andrey Titunin

doi:10.52957/2782-1919-2026-7-1-43-55

UDC

691.175 693.632 004.9

REDUCING THE MATERIAL CONSUMPTION OF STUCCO DECORATIONS BASED ON INFORMATION TECHNOLOGY Reducing the material consumption of stucco decorations based on information technology

АА Аа

Published in Smart composite in construction · Pages 43–55 · Rubric: Construction materials and products

DOI: https://doi.org/10.52957/2782-1919-2026-7-1-43-55

Received: 12.01.2026 Accepted: 05.03.2026 Published: 21.03.2026

Authors

Sergey Fedosov

Evgeniy Shabanov

Andrey Titunin

Sergey Fedosov

Academic degree: doctor of technical sciences

Science rang: academician Russian Academy of Architecture and Construction Sciences ; professor

Moscow State University of Civil Engineering Professor · kafedra tehnologiy i organizacii stroitel'nogo proizvodstva

Evgeniy Shabanov

Kostroma State Agricultural Academy

Andrey Titunin

Kostroma State University Russian Federation

ABSTRACT

The use of modern additive technologies through the automation of the process of creating moulds and manufacturing moulded decorative elements allows for a reduction in material costs for construction work. However, the task of minimising the consumption of building materials is not fully solved. The paper describes an attempt to improve mould creation methods using parametric modelling, photogrammetry, and 3D printing. The authors provide a classification and list of the most common stucco decoration elements. The paper discusses algorithms and features of script development for obtaining digital models of basic types of moulds. To create flexible forms of complex configuration, the authors suggest using spherical objects – metaballs. Based on parametric algorithms, the result is obtained in the form of polygonal models ready for 3D printing. The proposed method of creating forms allows for more accurate prediction of the consumption of building materials and significantly facilitates the work of contractors.

KEYWORDS

stucco decor, reduction of material consumption, additive technologies, 3D printing, parametric modeling, metaballs, photogrammetry

1. Fedosov, S.V., Fedoseev, V.N., Zaitsev, I.S. and Zaitseva, I.A. (2023), Features of domestic and foreign simulation tools use for structural modeling of civil engineering buildings and constructions, Umnye kompozity v stroitel'stve [Smart Composite in Construction], vol. 4, no. 2, pp. 18-31 (in Russian). Available at: https://comincon.ru/en/nauka/issue/5046/view (accessed 20.12.2025). DOI: https://doi.org/10.52957/2782-1919-2024-4-2-18-31; EDN: https://elibrary.ru/AZAPCF

2. Inozemtcev, A.S., Korolev, E.V. and Duong, Thanh Qui (2018), Analysis of existing technological solutions of 3D-printing in construction, Vestnik MGSU, vol. 13, no. 7 (118), pp. 863-876 (in Russian). DOI:https://doi.org/10.22227/1997-0935.2018.7.863-876. EDN: https://elibrary.ru/XUWKRV

3. Rapid prototyping report, Business New, 1997, vol. 008, no. 2 [online]. Available at: http://www.cadcamnet.com (accessed 20.12.2025).

4. Kim, D.M. (2013), Contour crafting: a future method of building. Available at: http://illumin.usc.edu/assets/submissions/755/Contour20Crafting20revision.pdf (accessed 20.12.2025).

5. Parfenov, V.A. (2023), Laser 3D scanning in digitization, reconstruction and copying of sculptural monuments, Historical informatics, vol. 1, no. 43, pp. 114-124 (in Russian). DOI: https://doi.org/10.7256/2585-7797.2023.1.40440; EDN: https://elibrary.ru/ODGXGC

6. Perevozchikova, S.V. and Belov, V.V. (2021), Dry mix mortar for restoration of buildings, Umnye kompozity v stroitel'stve [Smart Composite in Construction], vol. 2, no. 1, pp. 14-19. DOIhttps://doi.org/10.52957/27821919_2021_1_14. EDN: https://elibrary.ru/EJPGSF

7. Gasanov, P.G., Smirnov, Yu.V., Chusov, A.N. and Politaeva, N.A. (2023), Monitoring of the facades of buildings accident rate in St. Peterburg using 3D scanning technologies, Umnye kompozity v stroitel'stve [Smart Composite in Construction], vol. 4, no. 3, pp. 84-94 (in Russian) [online]. Available at: https://comincon.ru/en/nauka/issue/5047/view (accessed 20.12.2025). DOI: https://doi.org/10.52957/2782-1919-2024-4-3-84-94; EDN: https://elibrary.ru/EMMGTP

8. Lesovik, V.S., Chernysheva, N.V. and Glagolev, E.S. 3D additive technologies in construction, Intelligent building composites for green construction, Belgorod: Publishing house of BSTU named after V.G. Shukhov: 2016, pp. 157-167 (in Russian). EDN: https://elibrary.ru/WIJFHD

9. The Future of Construction and Building Materials: Trends for 2025, Roscongress Foundation: website [online]. Available at: https://roscongress.org/ (accessed 20.12.2025).

10. Adamtsevich, A.O., Pustovgar, A.P., Adamtsevich, L.A., Kramerov, D.V. and Vorobiev, P.Yu. (2023), Investigation of the working features of concrete structures manufacturedusing technologies of additive building manufacturing, Stroitel’nye Materialy [Construction Materials], no. 12, pp. 38-46 (in Russian). DOIhttps://doi.org/10.31659/0585-430X-2023-820-12-38-46. EDN: https://elibrary.ru/TQIBUJ

11. Amirkhanian, T.A.1 and Ievleva, O.T. (2024), Additive technologies in architecture: New horizons, Inzhenernyj vestnik Dona, vol. 9, no. 117, pp. 98-111 (in Russian). EDN: https://elibrary.ru/BGWUYR

12. Aleksanin, A.V. and Markevich, A.I. (2017), The use of additive technologies in the construction of buildings, Bulletin of BSTU named after V.G. Shukhov, no. 6, pp. 62-65 (in Russian). DOIhttps://doi.org/10.12737/article_5926a0596fbac2.77621545. EDN: https://elibrary.ru/YQPJKZ

13. Pukharenko, Yu.V. Shangina, N.N., Kharitonov, A.M. and Sizov, D.S. (2024), Problems and prospects for the development of information modeling for the restoration of cultural heritage sites, Academia. Architecture and Construction, no. 3, pp. 171-175 (in Russian). DOIhttps://doi.org/10.22337/2077-9038-2024-3-171-175. EDN: https://elibrary.ru/EZOVXK

14. Federal unit prices for repair and construction work. Collection 64. FERr-2001-64: prices for electrical installation work / Ministry of Construction of the Russian Federation. M.: Profizdat, 2001. (Federal unit prices for repair and construction work) [online]. Available at: https://base.garant.ru/73453011 (accessed 20.12.2025).

15. Sterlikova, A.A and, Bulgakov, P.A. (2017), Application of information technologies in construction, Modern sci.: current issues and development prospects, pp. 153-158. EDN: https://elibrary.ru/XWMPBH

16. Svirskaya, T.A. (2007), Ways of using computer technologies in the restoration of architectural monuments. Bul. Polotsk State Univer. Ser. F. Construction. Appl. Sci., no. 12, pp. 17-24 (in Russian).

17. Zhang, P. (2021), Metaball based discrete element method for general shaped particles with round features, Computational Mechanics, vol. 67, no. 4, pp. 1243-1254. DOI: https://doi.org/10.1007/s00466-021-02001-9; EDN: https://elibrary.ru/UGSFZD

GOST

Fedosov S. V., Shabanov E. S., Titunin A. A. Reducing the material consumption of stucco decorations based on information technology // . 2026. pp. 43-55. DOI: https://doi.org/10.52957/2782-1919-2026-7-1-43-55. (Date of access 19.08.2026).

MLA

Sergey Fedosov, Shabanov E. S., Titunin A. A.. "Reducing the material consumption of stucco decorations based on information technology." (2026): 43-55. DOI: https://doi.org/10.52957/2782-1919-2026-7-1-43-55.

APA

Fedosov S. V., Shabanov E. S., Titunin A. A. (2026). Reducing the material consumption of stucco decorations based on information technology. , 43-55. https://doi.org/10.52957/2782-1919-2026-7-1-43-55

Chicago

Sergey Fedosov, Shabanov E. S., Titunin A. A.. "Reducing the material consumption of stucco decorations based on information technology." , no. (2026): 43-55. https://doi.org/10.52957/2782-1919-2026-7-1-43-55.

WIKI

{{cite journal | author = Fedosov S. V., Shabanov E. S., Titunin A. A. | title = Reducing the material consumption of stucco decorations based on information technology | journal = | year = 2026 | pages = 43-55 | doi = 10.52957/2782-1919-2026-7-1-43-55 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

REDUCING THE MATERIAL CONSUMPTION OF STUCCO DECORATIONS BASED ON INFORMATION TECHNOLOGY Reducing the material consumption of stucco decorations based on information technology

Confirmation