Dynamic models and algorithms for optimal control in building materials technology

Maksim Bakanov

doi:10.52957/2782-1919-2026-7-2-21-36

UDC

666.9.01 620.1

DYNAMIC MODELS AND ALGORITHMS FOR OPTIMAL CONTROL IN BUILDING MATERIALS TECHNOLOGY Dynamic models and algorithms for optimal control in building materials technology

АА Аа

Published in Smart composite in construction · Pages 21–36 · Rubric: Construction materials and products

DOI: https://doi.org/10.52957/2782-1919-2026-7-2-21-36

Received: 17.03.2026 Accepted: 12.05.2026 Published: 22.06.2026

Authors

Maksim Bakanov

National Research Moscow State University of Civil Engineering Russian Federation · Moscow

ABSTRACT

The modern production of building materials has to deal with the challenge of integrating fundamental physical and chemical knowledge of the material into operational automated control systems. The existing gap between static laboratory studies and simplified empirical models in automation is hindering the transition to the ‘Construction 4.0’ paradigm and intelligent quality management (Quality 4.0). The purpose of this study is to develop a universal quality control methodology that combines three key components, namely a fundamental physico-chemical model of the process, an algorithm for assessing the current state of the material based on indirect measurements, and an optimiser for control actions. The triad, designated as ‘Model – Assessment – Control’, allows the technological process to be viewed as a dynamic system with distributed parameters. A mathematical framework is presented, comprising heat and mass transfer equations and chemical kinetics, as well as modern state estimation methods (in particular, Kalman filters and particle filters) and optimal control algorithms, the Pontryagin maximum principle and reinforcement learning. The applicability of the methodology is demonstrated using the example of concrete mix transport. The proposed approach provides a basis for the creation of ‘smart’ manufacturing and digital twins in the construction industry.

KEYWORDS

building materials, hardening kinetics, model predictive control, Industry 4.0, Construction 4.0, Kalman filter, digital twin

1. Bazhenov, Iu.M. (2011), Concrete Technology: a textbook for students of higher educational institutions studying in construction specialties. Moscow: ASV Publishing House, 524 p. (in Russian).

2. Manin, P. (2025), Uberization of Construction. How the Industry is Transitioning to a Digital Environment / RBC Companies: Available at: https://companies.rbc.ru/news/yZw0YPjwPI/uberizatsiya-stroitelstva-kak-otrasl-perehodit-v-tsifrovuyu-sredu (accessed 12.03.2026) (in Russian).

3. Industry 4.0, Smart Factory and Connected Operations // SG Systems Global: [website]. (2024), Available at: https://sgsystemsglobal.com/ru/glossary/industry-4-0-smart-factory-and-connected-operations (accessed 12.03.2026) (in Russian).

4. Ginzburg, A.V., Adamtsevich, L.A. and Adamtsevich, A.O. (2021), The construction industry and the concept of "Industry 4.0": an overview, Bulletin of MGSU, no. 7, pp. 885-902. Available at: https://cyberleninka.ru/article/n/stroitelnaya-otrasl-i-kontseptsiya-industriya-4-0-obzor (accessed 12.03.2026) (in Russian). DOI: https://doi.org/10.22227/1997-0935.2021.7.885-911

5. Tanane, B., Bentaha, M.L., Dafflon, B. and Moalla, N. (2025), Bridging the gap between Industry 4.0 and manufacturing SMEs: A framework for an end-to-end Total Manufacturing Quality 4.0's implementation and adoption, Journal of Industrial Information Integration, vol. 45, p. 100833.

6. Mikaeva, S.A. and Mikaeva A.S. (2025), Improving product quality as a tool for ensuring economic security of the instrument-making industry in the context of Industry 4.0 development, Bulletin of Udmurt University. Series Economics and Law, vol. 35, no. 5, pp. 835-844 (in Russian). DOI: https://doi.org/10.18384/2949-5024-2025-3-89-100

7. Nahmad Vazquez, A., Garivani,, S. and Dackiw J.N. (2024), Decentralized, data-informed, robotic-based digital timber micro-factories, Construction Robotics, vol. 8, no. 2, p. 24.

8. Kosse, S. [et al.] (2023), Industry 4.0 enabled modular precast concrete components: a case study, International RILEM Conference on Synergising expertise towards sustainability and robustness of CBMs and concrete structures: proc. Cham: Springer Nature Switzerland, pp. 229-240.

9. Karpenko, N.I. (1996), General models of reinforced concrete mechanics. Moscow : Stroyizdat, 413 p. (in Russian).

10. Fedosov, S.V. (2010), Heat and mass transfer in technological processes of the construction industry: monograph. Ivanovo: PresSto, 363 p. (in Russian).

11. Porkhalo, V.A., Rubanov, V.G. and Lutsenko, O.V. (2014), Advisory control system for the clinker burning process using local subsystems based on the principles of autonomy and cascade, Devices and systems. Management, control, diagnostics, no. 9, pp. 4-9 (in Russian).

12. Pirov, F.S. (2011), Automation and control of technological processes of clinker burning in cement production: abstr. diss. ... cand. tech. sc.: 05.13.06; Moscow Automobile and Road Construction State Technical University (MADI). Moscow, 23 p. (in Russian).

13. Chumak, L.I., Lavreniuk, I.V. and Platonova T.O. (2010), Mathematical Modeling of the Drying Process of Ceramic Bricks in Tunnel Dryers, News of the Dnieper State Academy of Construction and Architecture, vol. 10, no. 151, pp. 26-30 (in Russian).

14. Lykov, A.V. (1967), Theory of Heat Conductivity. Moscow: Vyssh. shk., 600 p. (in Russian).

15. Carslaw, G. and Eger, D. (1964), Thermal conductivity of solids. Moscow: Nauka, 488 p. (in Russian).

16. Gagarin, V.G. (2000), Theory of the state and transfer of moisture in building materials and thermal insulation properties of building enclosing structures: abstr. diss. ... doc. eng. sc.: 05.23.01, 05.23.03; Research Institute of Building Physics of the Russian Academy of Architecture and Civil Engineering. Moscow, 47 p. (in Russian).

17. Khuzin, A.F. (2014), Kinetics of heat release during hydration of cement modified with a complex nanomodified additive, Bulletin of the Kazan State University of Architecture and Civil Engineering, no. 1 (35), pp. 216-220 (in Russian).

18. Reiner, M. and Leaderman, H. (1960), Deformation, strain, and flow, Physics Today, vol. 13, no. 9, pp. 47-48.

19. Shmigal'skii, V.N. (1968), Forming products on vibrating platforms. Moscow: Stroyizdat, 104 p. (in Russian).

20. Abzaev, Iu.A., Korobkov, S.V., Anikanova, L.A. and Starenchenko, V.A. (2022), Thermodynamic modeling of hydration of Portland cement with different water contents, Bulletin of Tomsk State University of Architecture and Civil Engineering, vol. 24, no. 5, pp. 122-132 (in Russian). https://doi.org/10.31675/1607-1859-2022-24-5-122-132.

21. Kalman, R.E. (1960), A new approach to linear filtering and prediction problems, Journal of Basic Engineering, vol. 82, no. 1, pp. 35-45.

22. Julier, S.J. and Uhlmann, J.K. (2004), Unscented filtering and nonlinear estimation, Proc. IEEE, vol. 92, no. 3, pp. 401-422.

23. Evensen, G. (2003), The ensemble Kalman filter: Theoretical formulation and practical implementation, Ocean dynamics, vol. 53, no. 4, pp. 343-367.

24. Johansen, A. (2009), A tutorial on particle filtering and smoothing: Fifteen years later. Trondheim: Norwegian University of Science and Technology, 40 p.

25. Goodfellow, Ian, Bengio, Yoshua and Courville, Aaron (2018), Deep Learning; translated from English by A.A. Slinkin. Moscow: DMK Press, 652 p. (in Russian).

26. Garcia, C.E., Prett, D.M. and Morari M. (1989), Model predictive control: Theory and practice – A survey, Automatica, vol. 25, no. 3, pp. 335-348.

27. Chereshko, A.A. (2022), Methods of technological process control based on associative predictive models: diss. … cand. eng. sc.: 2.3.3. Moscow, 116 p. (in Russian).

28. Pontriagin, L.S., Boltianskii, V.G., Gamkrelidze, R.V. and Mishchenko, E.F. (1969), Mathematical theory of optimal processes. Moscow: Nauka, 384 p. (in Russian).

29. Storozhuk, N.A. and Dekhta, T.N. (2018), Optimal control of concrete mixture compaction by vibration and its features, News of the Dnieper State Academy of Construction and Architecture, no. 4 (243-244), pp. 56-64 (in Russian). DOI: https://doi.org/10.30838/J.BPSACEA.2312.231018.56.311

30. Sutton, R.S. and Barto, A.G. (1998), Reinforcement learning: An introduction. Cambridge: MIT Press, 322 p.

31. GOST 7473-2010. Concrete Mixes. Specifications. Standartinform: Moscow, Russia. 2012. 19 p. (in Russian).

32. Sograbi, T.V. (2022), The Role of Gas Interaction with the Surface of an Aerosol Particle in its Motion at Large Knudsen Numbers: diss. ... cand. phys. and math. sc. Yekaterinburg, 123 p. (in Russian).

GOST

Bakanov M. O. Dynamic models and algorithms for optimal control in building materials technology // . 2026. pp. 21-36. DOI: https://doi.org/10.52957/2782-1919-2026-7-2-21-36. (Date of access 19.08.2026).

MLA

Maksim Bakanov. "Dynamic models and algorithms for optimal control in building materials technology." (2026): 21-36. DOI: https://doi.org/10.52957/2782-1919-2026-7-2-21-36.

APA

Bakanov M. O. (2026). Dynamic models and algorithms for optimal control in building materials technology. , 21-36. https://doi.org/10.52957/2782-1919-2026-7-2-21-36

Chicago

Maksim Bakanov. "Dynamic models and algorithms for optimal control in building materials technology." , no. (2026): 21-36. https://doi.org/10.52957/2782-1919-2026-7-2-21-36.

WIKI

{{cite journal | author = Bakanov M. O. | title = Dynamic models and algorithms for optimal control in building materials technology | journal = | year = 2026 | pages = 21-36 | doi = 10.52957/2782-1919-2026-7-2-21-36 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

DYNAMIC MODELS AND ALGORITHMS FOR OPTIMAL CONTROL IN BUILDING MATERIALS TECHNOLOGY Dynamic models and algorithms for optimal control in building materials technology

Confirmation